A 2.0 mil clear print-treated polyester film with 207-4841 pigmented permanent acrylic pressure sensitive adhesive on a 90# layflat liner. This film is designed to accept a variety of UV curable and solvent-based screen inks. May also be used with flexographic, offset and letterpress inks but must be tested prior to use.

Applications

Product identification markings, decorative decals and name-plates.

Note: Phosphorescent film may not meet state and local codes for use as safety film in your area. Check local regulations.

Thickness

Film & Phosphorescent Coating – 4.0 to 4.5 mils.
Adhesive – 1.4 to 1.6 mils.
Liner – 6.7 mils.
(Thickness variation +/- 10%)

Expected Lifetime Exterior

Not recommended for outdoor use.

Afterglow To conditioned eye

1 hour minimum.

Light Accumulation Saturation For maximum brightness

30 minutes under maximum light conditions.