This gray double coated acrylic foam tape has been specifically designed to provide high bonding strength to a variety of materials and surfaces and is temperature resistant. This tape is designed to offer similar performance to 3M VHB Tape 4910 at a lower cost.

Features
 Excellent bond strength and initial tack
 Excellent solvent resistance
 Excellent UV resistance
 Permanent Applications

Carrier
Closed Cell Acrylic Foam Core

Adhesive
High Performance Acrylic

Total Tape Thickness
45 mils (1.15 mm)

Peel Adhesion
22 lbs/in2 (95 N/25 mm)

Tensile
86 lbs/in2 (590 kPa)

Adhesion to Stainless Steel (no dwell)
424 oz/in, 27.8 N/25 mm

Temperature Range
212°F (100°C) Long Term; 320°F (160°C) Short Term

To achieve ultimate adhesion, the bonding surface should be dry, clean and free of dirt and oils. The strength of the adhesive bond is dependent on the amount of surface area directly contacting the adhesive. Firm pressure is recommended to obtain good adhesive to surface contact.

†Note: Values should not be used for specification purposes. Each user should make their own test to determine the products suitability for their own intended use and shall assume all risks and liabilities in connection therewith. Materials should be stored at 70°F (21°C) with 50% relative humidity.