3 mil steel foil tape, coated with an aggressive rubber adhesive. Will adhere to a variety of substrates. Can be used on irregular and curved surfaces. Excellent for creating a steel surface for magnetic signage, nameplate or advertising specialties applications. An excellent alternative for temporary holding applications.

Features
• Vapor/Water barrier seals out dust, moisture
• Superior bond with aggressive rubber quick bonding adhesive system

Backing
3 mils (.076 mm) steel foil

Adhesive
3.4 mils (0.086 mm) Rubber

Total Thickness
6.4 mils (0.162 mm)

Adhesion to Stainless Steel
152 oz/in, 41.5 N/25 mm

Temperature Range
-0°F to 150°F , -18°C to 66°C

Color
Natural metal finish

Application
To achieve ultimate adhesion, the bonding surface should be dry, clean and free of dirt and oils. The strength of the adhesive bond is dependent on the amount of surface area directly contacting the adhesive. Firm pressure is recommended to obtain good adhesive to surface contact.

†Note: Values should not be used for specification purposes. Each user should make their own test to determine the products suitability for their own intended use and shall assume all risks and liabilities in connection therewith.

Materials should be stored at 70°F (21°C) with 50% relative humidity.