 D3032 is double-sided; white, closed cell polyethylene foam
with a high tack adhesive. The soft foam carrier creates conformability that allows this tape to be used for gap filling. This product provides a good balance of tack, peel
and high cohesive strength
Features
• Permanent bond
• Highly Conformable
• Die Cuts Easily
• Closed Cell to prevent Water Absorption
• High Load Bearing Ability
• Wide Temperature Range
Carrier
Polyethylene Foam
Adhesive
2 mils (0.051mm) each side-Acrylic
Liner
5 mils (0.12mm) Kraft Paper
Adhesion to Stainless Steel
70 oz/in, 20 N/25 mm
Tensile Strength
76.5 oz/in, 21 N/25mm
Elongation
265%
Tear Strength
685.5 oz/in, 188 N/25mm
Temperature Range
-40°F to 250°F , -40°C to 121°C
Color
White
Application
Indoor bonding of plastics, metals and wood, sound attenuation, cushioning or spacer applications and lightweight shim. Similar to 3M 4008, 4016, 4032
To achieve ultimate adhesion, the bonding surface should be dry, clean and free of dirt and oils. The strength of the adhesive bond is dependent on the amount of surface area directly contacting the adhesive. Firm pressure is recommended to obtain good adhesive to surface contact.
†Note: Values should not be used for specification purposes. Each user should make their own test to determine the products suitability for their own intended use and shall assume all risks and liabilities in connection therewith.
Materials should be stored at 70°F (21°C) with 50% relative humidity. |
