Top » Catalog » Vinyl, Tuning Film » Sublime BF Gloss » vin3tfcolor60
Vinyl, Tuning Film
  3M Di-Noc, 180C
  MACtac Brushed Metal BF
  MACtac Carbon BF
  MACtac Iridescent
  MACtac Matte
  MACtac Stellar BF
  MACtac Textured
  MACtac Velvet BF
  Sublime BF Gloss
  Sublime BF Matte
Tuning Film Gloss Color TFxxxxxBF 60" 3.4mil
$9.50 /lft
82+ lft
$8.50 /lft
Regular Price:$9.50 /lft
82+ lft Price:$8.50 /lft
Available Options:
Qty (lft):  
Sublime BF Gloss:  

TF 700 BF Sublime is a 85m polymeric stabilized vinyl film coated with a low tack micro structured acrylic adhesive. TF 700 BF Sublime is designed for Vehicle Wrapping. The main characteristic of this series is the easiness of application, thanks an excellent repositionability and the micro structured adhesive used. Car wrapping has never been so easy!

Face material :

85μm polymeric stabilized calendered vinyl, cadmium free.

Adhesive :
Repositionable clear solvent based acrylic adhesive.

Liner :
Highly stable 145 gsm white micro embossed PE coated paper.

Vertical exposure:

Zone 1Zone 2Zone 3
white & black8 years6 yearsNot Recom
clear & color7 years5 yearsNot Recom
metallics6 years4 yearsNot Recom

Horizontal exposure : reduced by 40%

Zone 1: North, West, Central & Eastern Europe, North America (excl. : USA deserts - zone 3)

Zone 2: South Europe, Central & South America, Asia Pacific, Australian South coastal area (from Perth to Brisbane), New Zealand

Zone 3: Greater Middle East, Africa, Australian Desert areas & North of Perth-Brisbane coastal area, USA (Arizona, California, Florida, Nevada, New Mexico, Texas, Utah), Mexico

Temperature ranges
Application : +15C to + 40C
End-use : - 40C to + 90C

Flammability ISO 3795
Sample mounted on aluminium : self-extinguishing.

Solvent and chemical resistance
Resistant to most oils and grease, fuel, aliphatic solvents, weak acids, salts and alkalis.

Clean and degrease the substrate

All surfaces to which the material will be applied must be thoroughly cleaned from dust, grease or any contamination. Use soapy water to remove the dust and degrease the car surface with isopropylic alcohol.

on flat or slightly curved surfaces

Apply TF 700 BF Sublime with the dry application method.
on convex areas
Heat the film with a heat gun before conforming it over the convex area.
on corrugated or concave areas
If the film is stretched into a corrugation it may pop-out after a few weeks.
It is, therefore, recommended to cut the film and to apply it in the corrugation without tension.
on rivets
Apply the film over the rivet with high pressure and heat it with a heat gun (temperature over 500C). The film may lift slightly after few weeks.

Once heated, TF 700 BF Sublime is very easy to remove, leaving almost no adhesive residue on the car body.

Important remark
The compatibility of paints and lacquers should be tested by the end-user, prior to use.

  WJT Sign Supply is not responsible for typographical or photographical errors.
  Prices are listed in Canadian funds and specifications are subject to change without notice.
  WJT Sign Supply
  160 Bentley St. Markham, Ontario, Canada L3R-3L2
  Toll-free: 1-800-465-8650
  Tel: 905-475-2632
Copyright © 2005 WJT Sign Supply.
Powered by osCommerce