Concept® 213 is a 3.75 mil clear flexible embossed polypropylene film designed for use as an economical short term protective overlay for Traffic Graffic™ decals. This laminate is also an environmentally friendly alternative to PVC films. Concept® 213 overlaminate offers a permanent acrylic pressure sensitive adhesive formulated for exceptional clarity and bond for these types of applications.

Applications:
This product is intended for use as an overlaminating film to produce short term indoor Traffic Graffic™ floor decals, table and counter top applications. Concept® 213 is also approved for indirect food contact. The adhesive is formulated to adhere to most common printing inks. However, specific formulations must be tested before use. Some inks may contain excessive flow additives that could reduce adhesion of this product. Test before production.

Slip Resistance: Concept® 213 is classified under UL 410 for floor graphics overlay applications.

Indirect Food Contact: The film and adhesive complies with the following citations in 21CFR 174 thru 182 and 21CFR 175.105 respectively.

Thickness Film: 3.75 mils.
(Thickness variation +/- 10%)

Temperature Ranges: Minimum application temperature is +40°F. Service temperature is -40°F to +200°F.

Expected Exterior Exposure: This product is designed for interior applications.

Adhesion: To stainless steel 40 Oz. / In.
Tested according to PSTC-101 Method A with 24-hour dwell at 70°F and 50% relative humidity. Typical values. Individual values may vary. Test thoroughly before production.