Top » Catalog » Tool, Finishing » Shear » accu2001evo-12
 
0
$0.00
Categories
Tool, Finishing
  Cornermate
  Cornermate for Aluminum
  Grommeting
  Hole Punch
  Shear
Manufacturers
Information
Accu Cutter Company
Accu Cutter 2001EVO 12" Modular Shear
[accu2001evo-12]
$1,050.00
Regular Price:$1,050.00

For 2006 Accu Cutter has completely redesigned the Model 2001 12” Shear. The new design is the result of two years of systematically evaluating and field testing every component of the 2001. No part was left unchallenged. The result of the development effort is a new shear that is lighter, more compact, more durable, and easier to use. At first glance it may look the same as the old shear, but the shear table is the only part that remains the same as the original 2001. It is the complete EVOlution of the 12” table shear and is named the 2001EVO. Listed below are just some of the features that make the 2001EVO unique.

Bronze Bushings

Five oil impregnated bronze bushings have been added to reinforce pivot points and extend the usable life of the shear. The bushings take the abuse and protect the parts of the shear. When the bushings wear, they are inexpensive and easy to replace.

Lighter & More Compact

The 2001EVO is still a 12” shear. However, as a result of the redesign the weight has been reduced by five pounds and the overall height and length have been reduced by two inches. The shear now takes less bench space and is easier to move around the shop.

Improved Drop-Off Gauge

Most drop-off gauges are set by tightening a thumb screw or bolt on a rod. When this is done, it makes a mark on the rod. Eventually there are so many marks on the rod that they interfere with the adjustment of the drop-off gauge. Accu Cutter’s new drop-off gauge pinches the rod when it is tightened. There is no mark, and the drop-off gauge remains infinitely adjustable. The drop-off gauge is shown to the right, and it also shown mounted on the shear in the right picture at the top of the page.

Reduced Effort

The operating geometry of the 2001 has been modified and bronze bushings added to improve its leverage. The result is a 35% reduction in the effort required to operate the shear. The improvement is noticeable regardless of the material being cut, and it is particularly dramatic when cutting hard materials like engravers brass and brass plated steel.

“Blade Stabilizer”®

A blade stabilizer or brace has been developed and added to the upper blade holder to improve the ability to shave or trim harder materials like brass plated steel.

Step Ruler

The typical ruler is a stamped piece of thin metal. The ruler from Accu Cutter is machined from a thick, solid piece of steel. There are six separate steps involved in its manufacture with the last being a precision grinding of the front edge to insure that the ruler is straight and true. Because of its thickness, it is very stable, and the edge will not lift or distort allowing material to slide underneath the ruler. Lastly, the ruler is stepped to place the measuring edge close to the work surface for easier reading. The ruler is graduated in 1/16th's of an inch.

Glide Block

There is a 2.5” square block on the 2001EVO and similar shears that is the connection between the handle and the upper blade holder. It has a slot in it. Every time the handle is moved, a pin moves in the slot. The slot is under great pressure and subject to wear, particularly if it is not lubricated regularly. Originally the glide block was made from aluminum, but Accu Cutter changed it to steel several years ago to improve the durability of the shear. An oil impregnated bronze bushing has also been added.

Curved Power Blades

The Curved Power Blade represents a substantial performance improvement for the scissors type shear. The new blade with its graceful curve or arc replaces the old style, straight edge blade. The new blade improves both the quality of the cut and ease of operation of the 2001 Shear. The Curved Power Blades were developed by Accu Cutter and are available for cutting metal or plastic. They are standard on the 2001 Shears and are also available as replacement blades for all 2001 Shears. The bottom blade remains unchanged.

Operator's Manual

A comprehensive Operator’s Manual is included with every 2001EVO Shear. The manual provides information and instructions concerning the set up and proper use of the 2001EVO Shear, installing and adjusting the shear blades, and proper maintenance and safety procedures. In addition, Accu Cutter is always available by telephone to provide the shear operator with advice and assistance.

Shear Capacity

  • Aluminum................................................ .040"
  • Brass....................................................... .025"
  • Flexible Plastic......................................... .125"
  • Brass Plated Steel..................................... .020"

Size & Weight

  • Size: 23"L x 15"W x 8"H.
  • Weight: Approximately 25 lbs.

Availability & Ordering

The 2001EVO is available for immediate shipping. At the time of ordering it is necessary to specify which type of blade you prefer. The choices are either for metal, for plastic or a combination blade. If you are unsure which blade will be best for you, call Accu Cutter to discuss your choice.

  WJT Sign Supply is not responsible for typographical or photographical errors.
  Prices are listed in Canadian funds and specifications are subject to change without notice.
  WJT Sign Supply
  1160 Tapscott Road, Unit 7, Scarborough, Ontario, Canada M1X 1E9
  Tel: 905-475-2632
Copyright © 2005 WJT Sign Supply.
Powered by osCommerce