Top » Catalog » Print Media, PSA » Vinyl, Rough Surface » sol-285-54
 
0
$0.00
Categories
Print Media, PSA
  Drywall Graphics
  Film, Carrier-less Decal
  PET, Polyester
  Poly, Cloth, Canvas
  PP, Synthetic Paper
  Vinyl, ATV
  Vinyl, B-free Install
  Vinyl, Bus & Transit
  Vinyl, Clear
  Vinyl, Clear Adhesive
  Vinyl, Floor & Carpet
  Vinyl, Flour/Phosphorescent
  Vinyl, Gray Adhesive
  Vinyl, Hi-tack Adhesive
  Vinyl, Holographic
  Vinyl, Light Blockout
  Vinyl, Metalized
  Vinyl, Opaque
  Vinyl, Perforated
  Vinyl, Reflective
  Vinyl, Removable
  Vinyl, Rough Surface
  Vinyl, Semi-rigid
  Vinyl, Translucent
  Vinyl, Vehicle Wrap
  Window Graphics
Manufacturers
Information
General Formulations
GF 285 RoughMark Matte White Hi-tack Rem 3.5mil 54"x150'
[sol-285-54]
$1.03 /sq ft.
$695.00
Sq Ft. Price:$1.03
Regular Price:$695.00
Available Options:
Qty:  

Concept® 285 RoughMark™ is a 3.5 mil matte opaque polymeric vinyl film coated with a high-tack removable (HTR) acrylic pressure sensitive adhesive on a 90# layflat liner. The 90# liner provides excellent dimensional stability for digital printing. Concept® 285 accepts a variety of solvent-based, eco-solvent, latex and UV curable inks common to wide format digital printing systems.

Applications
Concept® 285 RoughMark™ can be used in applications where a conformable removable vinyl is desired. This film conforms well with controlled heat and features clean removability from a variety of moderately textured substrates including brick, block, and concrete surfaces (vertical application only). If a high gloss finish is desired, it is recommended to use Concept® 242 gloss clear cast laminate. NOTE: If applied to a painted surface the paint must bond tightly to the substrate. Test all applications prior to use. Not designed for coated/ sealed/ treated stainless steel, brass or bronze surfaces.

Thickness
Film 3.5 mils.
Adhesive 1.8 to 2.1 mils.
Liner 6.5 mils.
(Thickness variance +/- 10%)

Temperature Ranges
Minimum application temperature is +40°F.
Service temperature is -40°F to +200°F

Adhesion
To stainless steel - 16 oz/in. PSTC-101 Method A with 24 hr. dwell at 70°F and 50% relative humidity.
Typical values. Individual values may vary. Test thoroughly for your specific use.

Removability
Removable up to 6 months for common substrates under normal exposure conditions.

  WJT Sign Supply is not responsible for typographical or photographical errors.
  Prices are listed in Canadian funds and specifications are subject to change without notice.
  WJT Sign Supply
  1160 Tapscott Road, Unit 7, Scarborough, Ontario, Canada M1X 1E9
  Tel: 905-475-2632
Copyright © 2005 WJT Sign Supply.
Powered by osCommerce