Top » Catalog » Print Media, PSA » Drywall Graphics » sol-pn628w54l100
 
0
$0.00
Categories
Print Media, PSA
  Drywall Graphics
  Film, Carrier-less Decal
  PET, Polyester
  Poly, Cloth, Canvas
  PP, Synthetic Paper
  Vinyl, ATV
  Vinyl, B-free Install
  Vinyl, Bus & Transit
  Vinyl, Clear
  Vinyl, Clear Adhesive
  Vinyl, Floor & Carpet
  Vinyl, Flour/Phosphorescent
  Vinyl, Gray Adhesive
  Vinyl, Hi-tack Adhesive
  Vinyl, Holographic
  Vinyl, Light Blockout
  Vinyl, Metalized
  Vinyl, Opaque
  Vinyl, Perforated
  Vinyl, Reflective
  Vinyl, Removable
  Vinyl, Rough Surface
  Vinyl, Semi-rigid
  Vinyl, Translucent
  Vinyl, Vehicle Wrap
  Window Graphics
Manufacturers
Information
Mactac
wallPoodle Semi-rigid Permanent 6mil 54"x100'
[sol-pn628w54l100]
$0.70 /sq ft.
$345.00
Sq Ft. Price:$0.70
Regular Price:$345.00

PN628P is a 6.0mil matte white, semi rigid calendered PVC film designed for UV screen, solvent-based ink jet and off-set printing. The product is coated on one side with a permanent acrylic pressure sensitive adhesive and supplied with a 90# SuperFlat™ P.E. coated kraft liner.

INTENDED FOR:
Wide format, screen, eco-solvent, solvent-based, latex, UV-cured inkjet and off-set printing using UV inks or plastic/oxidizing inks. To achieve the best possible print quality, please make sure that the correct ICC profiles or printer settings are used. Profiles can be downloaded from www.mactac.com. Printer and heater settings and ICC profiles can also be downloaded from some O.E.M. or software manufacturer’s websites.

The ICC profiles are provided solely as a customer resource. Print environments, the individual nature of printing systems, inks and software can significantly affect output. It is the customer’s responsibility to determine the suitability of any profile for use in their specific print environment.

  1. The user is responsible for determining the product’s suitability, including adhesion and if needed, removal characteristics when used in applications other than listed specifically in this Performance Guide.
  2. If there are any questions about applications, please contact your MACtac sales representative to discuss your requirements for recommendations.

LIMITATIONS:
Due to the wide variability of interior walls, sealants and paints, no claims for successful applications to or removal from painted wall surfaces are made by MACtac. It is the users’ responsibility to determine the products suitability for the intended wall.

DURABILITY:
The outdoor durability of the unprinted film is 3 years. Overlamination of the inkjet-printed material with Permacolor® overlaminates delays color fading that may occur over time. This color fading is mainly dependent upon the inks quality (see technical data sheets given by the ink manufacturers) and the pressure sensitive media being used.

SHELF LIFE:
2 years from Date of Manufacture when stored at 60/77°F (15/25°C) and 50% relative humidity in the original package.

RECOMMENDATIONS:
Always test your MACtac media with your inks and laminating films prior to commercial use.

1) Printing Conditions: Print in conditioned pressroom at ±73°F (23°C) and 50% RH. The maximum allowable ink saturation is 270%.
--- a) Images printed with solvent inks must be thoroughly dried prior to rolling for shipment. Retained solvent will affect edge adhesion.

2) Transportation Conditions: To allow for easy transportation, IMAGin media can be rolled up, with the image out, with a minimum diameter of 6 inches (15cm).
--- a) When the image is not protected by an overlaminate, make sure the print is completely dry and protected in a plastic bag.
--- b) During transportation or storage, avoid exposing them to extreme temperature and humidity changes.

Surface Burning Characteristics
Test Method: ASTM E84-01 or ANSI/NFPA 255 or UCB 8-1
Flame Spread: 20
Smoke Density: 160
Meets:
ANSI Class A
NFPA Class A
UCB Class 1

Temperature Ranges
Minimum Application: 50°F (+10°C)
End Use: -40°F to 180°F (-40°C to 82°C)

WallNOODLE® has been tested according to ASTM E-84 “Surface Burning Characteristics of Building Materials” and receives a Class A rating according to ANSI/NFPA and IBC classification.

  WJT Sign Supply is not responsible for typographical or photographical errors.
  Prices are listed in Canadian funds and specifications are subject to change without notice.
  WJT Sign Supply
  1160 Tapscott Road, Unit 7, Scarborough, Ontario, Canada M1X 1E9
  Tel: 905-475-2632
Copyright © 2005 WJT Sign Supply.
Powered by osCommerce