Concept® 285 RoughMark™ is a 3.5 mil matte opaque polymeric vinyl film coated with a high-tack removable (HTR) acrylic pressure sensitive adhesive on a 90# layflat liner. The 90# liner provides excellent dimensional stability for digital printing. Concept® 285 accepts a variety of solvent-based, eco-solvent, latex and UV curable inks common to wide format digital printing systems.

Applications
Concept® 285 RoughMark™ can be used in applications where a conformable removable vinyl is desired. This film conforms well with controlled heat and features clean removability from a variety of moderately textured substrates including brick, block, and concrete surfaces (vertical application only). If a high gloss finish is desired, it is recommended to use Concept® 242 gloss clear cast laminate. NOTE: If applied to a painted surface the paint must bond tightly to the substrate. Test all applications prior to use. Not designed for coated/ sealed/ treated stainless steel, brass or bronze surfaces.

Thickness
Film 3.5 mils.
Adhesive 1.8 to 2.1 mils.
Liner 6.5 mils.
(Thickness variance +/- 10%)

Temperature Ranges
Minimum application temperature is +40°F.
Service temperature is -40°F to +200°F

Adhesion
To stainless steel - 16 oz/in. PSTC-101 Method A with 24 hr. dwell at 70°F and 50% relative humidity.
Typical values. Individual values may vary. Test thoroughly for your specific use.

Removability
Removable up to 6 months for common substrates under normal exposure conditions.