Top » Catalog » Print Media, PSA » Vinyl, Floor & Carpet » sol-md128fw54l82
 
0
$0.00
Categories
Print Media, PSA
  Drywall Graphics
  PET, Polyester
  Poly, Woven Cloth
  PP, Synthetic Paper
  Vinyl, ATV
  Vinyl, B-free Install
  Vinyl, Bus & Transit
  Vinyl, Clear
  Vinyl, Clear Adhesive
  Vinyl, Floor & Carpet
  Vinyl, Flour/Phosphorescent
  Vinyl, Grey Adhesive
  Vinyl, Hi-tack Adhesive
  Vinyl, Metalized
  Vinyl, Multi-print
  Vinyl, Perforated
  Vinyl, Reflective
  Vinyl, Removable
  Vinyl, Rough Surface
  Vinyl, Semi-rigid
  Vinyl, Translucent
  Vinyl, Vehicle Wrap
  Window Graphics
Manufacturers
Information
Mactac
IMAGin M-Dot Floor Vinyl 7.9mil 54"x82'
[sol-md128fw54l82]
$0.74 /sq ft.
$275.00
Sq Ft. Price:$0.74
Regular Price:$275.00
Available Options:
Qty:  

MD128F is a 7.9-mil matte white PVC film designed to be directly printable with Latex, UV and solvent and eco-solvent ink printing. The product is coated on one side with a semi-sphere structured (dot) clear removable, acrylic pressure sensitive adhesive and supplied with a 74# White Kraft release liner.

INTENDED FOR: MD128F is designed for short term indoor floor graphic advertising and promotion on flat, smooth surfaces. No lamination needed!

Physical Properties:
Property | Typical Values | Test Method ,
Film Thickness / Total Thickness: 7.9 mil (200μm) / 14 mil (195μm)
Peel Adhesion in Lb./in. (g/25mm), 180° on glass - 24 hr.: 0.82 (375) | FTM - 1
Quick Tack, lb./in˛ (N/25mm), Stainless Steel: 0.55 (250) | FTM - 9
Elongation @ Break (%) : > 150
Dimensional Stability, (mm),48 hours @ 158°F:max 0.1 |FTM - 14, 10” x 10” Sample Bonded to aluminum
Temperature Ranges,Minimum Application: 50°F (+10°C), End Use: -4°F to 158°F (-20°C to 70°C)
Anti-Slip Certification: PTV 36+, Low slip potential | EN 13036-4
Fire Certification: Bfl-sl, (Bfl = Flooring material), (s1 = noncombustible) | EN 13501-1

DURABILITY: The indoor durability of this film is up to 6 months or more depending on foot traffic on the floor. This product is designed for short term indoor applications only. Exposure to heavy scrubbing equipment and cleaning chemicals may result in shorter floor life. Over-lamination of this inkjet-printed media is not recommended.

Approved Print Materials:
Digital: UV Inkjet, Eco-solvent, True solvent, Latex

To achieve the best possible print quality, please make sure that the correct ICC profiles or printer settings are used. Profiles can be obtained from our Distributors or can be downloaded from www.mactac.com . Printer and heater settings and ICC profiles can also be downloaded from some O.E.M. or software manufacturer’s websites.

The ICC profiles are provided solely as a customer resource. Print environments, the individual nature of printing systems, inks and software can significantly affect output. It is the customer’s responsibility to determine the suitability of any profile for use in their specific print environment.

Shelf Life
1 year from D.O.M. when stored at 60/77°F (15/25°C) and 50% relative humidity in the original package.

Limitations
1) The user is responsible for determining the product’s suitability, including adhesion and if needed, removal characteristics when used in applications other than listed specifically in this Performance Guide.

2) If there are any questions about applications, please contact your Mactac sales representative to discuss your requirements for recommendations.

3) If this is a printed Performance Guide it is an uncontrolled document. Please check the Mactac website for the latest, most up-to-date version.

Recommendations
Always test your combination of IMAGin products, inks and laminating films prior to commercial use.

1) Printing Conditions: Print in conditioned pressroom at ±73°F (23°C) and 50% RH. Ink saturation should not exceed 270%.
NOTE: If printing on UV, please modify your print speed and curing settings for thin, soft media. Refer to your printer manufacturer’s user guide for these settings.

2) Drying Requirements: Solvent, Eco-solvent and Mild-solvent inkjet prints require 24 - 48 hr. drying time - open to the air. Inks do not dry when printed media is rolled up. The prints must be dry prior to lamination. Improperly dried prints will reduce adhesive performance and increase the risk of edge lifting and excessive shrinkage.

3) Laminating Conditions: Do not laminate this product.

4) Transportation Conditions: To allow for easy transportation, IMAGin series can be rolled up, with the image out, with a minimum diameter of 6 inches (15cm). When the image is not protected by an overlaminate, make sure the print is completely dry and protected in a plastic bag. During transportation or storage, avoid exposing them to extreme temperature and humidity changes.

5) Application: follow the general pressure sensitive application methods. Do not apply using the Wet application method.

  WJT Sign Supply is not responsible for typographical or photographical errors.
  Prices are listed in Canadian funds and specifications are subject to change without notice.
  WJT Sign Supply
  230 Denison Street, Unit B, Markham, Ontario, Canada L3R-1B6
  Toll-free: 1-800-465-8650
  Tel: 905-475-2632
Copyright © 2005 WJT Sign Supply.
Powered by osCommerce