Top » Catalog » Laminate, Specialties » Anti-Graffiti » ovl1cysag36328
 
0
$0.00
Categories
Laminate, Specialties
  Anti-Graffiti
  Chalk Board
  Decolam
  Enhancer
  Patterned
  Polyurethane
Manufacturers
Information
Mactac
PermaGard SAG36 Gloss PET Overlam 1.4mil 60"
[ovl1cysag36328]
$14.50 /yd
Regular Price:$14.50 /yd
Available Options:
Qty (yd):  

SAG 36 is a high gloss ultra clear durable polyester film with good UV and abrasion resistance. Thanks to its good solvent resistance, graffiti can be easily wiped clean from SAG 36.

Construction:
Face material:
1.4mil (36 μm) UV and abrasion resistant PET film.
Adhesive:
Long life clear acrylic pressure-sensitive.
Liner:
1.4mil (36 μm) clear PET

Typical Uses:
SAG 36 is a lamination film developed to protect private or public transport vehicles and areas (trains, subways, tramways, buses...) that require a graffiti protection. SAG 36 is not directly applied on the vehicles but is first laminated to a pressure sensitive (SAG 29 for decoration with a printed image or MACal 9800 Pro for decoration with a plain color). This combination of films can be applied only onto flat surfaces. Application on riveted, embossed or curved surfaces is not recommended. The edges of the product could be affected in the case of frequent contact with solvents.

Note: SAG 36 increases the impact resistance of windows. For safety reasons (emergency exits), it is important to keep some windows per carriage unprotected.

Durability:5 Years
Note: Exposure to severe temperatures and ultraviolet light, as well as conditions in southern US states and European countries, and in tropical, subtropical or desert regions, will cause a more rapid deterioration. This also applies to polluted areas, high altitude and south-facing exposure.

Chemical resistance: ANSI Z26.1 test #14 (non-stressed).
Resistant to non-abrasive soaps, denatured alcohol, water, detergents and most diluted acids and alkalis. Not affected by short term contact with most of aliphatic and aromatic hydrocarbons, ketones, esters, chlorinated hydrocarbons and alcohol.

Processing
Lamination
Mactac recommends to laminate SAG 36 on the vinyl film (SAG 29 or MACal 9800 Pro) with a professional laminator.
Application
To be done on a clean and degreased substrate with the dry application method.
Maintenance and cleaning
The cleaning solution must be wet, non-abrasive, without strong solvents and have a pH value between 3 and 11.
Product removal
Removal of SAG 36 and vinyl laminate will be made easier using heat. The remaining adhesive residue can be removed using isopropyl alcohol. Note: more adhesive residue will remain on surfaces using nitro-cellulosic paints and abraded paints. Removability is not warranted where varnishes or paints have not been fully oven dried or have insufficient anchorage to the substrate (i.e. due to the presence of rust, chipped paint...). We recommend removing the film at an angle of 90, slowly and at a constant speed. Any adhesive residue can be removed with isopropyl alcohol.

  WJT Sign Supply is not responsible for typographical or photographical errors.
  Prices are listed in Canadian funds and specifications are subject to change without notice.
  WJT Sign Supply
  160 Bentley St. Markham, Ontario, Canada L3R-3L2
  Toll-free: 1-800-465-8650
  Tel: 905-475-2632
Copyright © 2005 WJT Sign Supply.
Powered by osCommerce