Top » Catalog » Laser Cutting
 
0
$0.00
Categories
Manufacturers
Information
Laser Cutting
Legend 32 Laser System Our Legend 32 35-watt Laser will cut a variety of plastics other than PVC up to 6mm thickness with high precision and details, and in the case of acrylic, a flamed, finished edge is produced. The cost of cutting is determined by: a minimum setup time of cut file; cost of substrate with allowance for re-run; preparation time of substrate to fit table size of 31" x 19" and the actual cutting time which is mainly a function of substrate thickness and the number/size of letters and graphics.

To enhance the look of acrylic letters, decorative polyester can be applied to the face of acrylic before cutting to yield mirror gold, mirror silver and other metallic looking finishes. To speed up installation of small cutout letters, transfer adhesive can be applied to the back of the substrate prior to cutting.

Lasered Letter 3mm Acrylic Stock Colour
Clear, Sign White, Matte White, Opaque White, Black, Matte Black, Red, Yellow, Blue, Green, Brown.

4.5mm Acrylic Stock Colour
Clear, Sign White, Opaque White, Black, Red, Yellow, Blue, Brown.

6mm Acrylic Stock Colour
Clear, Sign White, Opaque White, Black

Simple Steps To Obtain An Accurate Job Estimate on LaserCut Letters:
  • Separate your design into 4 seperate groups: lettering, graphics / logo, background shape, bar or underline. This is required since the calculator estimates different typical path length for each type of group.
  • Determine the height and width(if required) for each contour, count the number of objects for each group and enter data into the respective tables. Letter height should be greater than the width of the letter. Enter the letter width instead if it is longer than the height.
  • Add finishing options as required.
  • Click the Continue button to calculate job cost.
  • lease note if the entered dimensions are greater than the table size 31" x 19", the letter or graphics will be cut in sections.
LaserCut Stencil LaserCut Stecils
Small stencils with lot of intricate details can also be done on the laser table. Common substrates used are 0.030"-0.060" lexan, HIP styrene and co-polyester, depending on coating type and application.

Simple Steps To Obtain An Accurate Job Estimate on LaserCut Stencils:
  • Determine the height and width of the stencil, add 2-3 inches all around (or as required) for over-spraying.
  • Choose 4.5mm Acrylic under "Substrate Options" in the calculator for common stencil substrates listed above. Enter the overall size of the stencil under the Logo/Graphic Group.
  • Click the Continue button to calculate job cost.
  • Please note if the entered dimensions are greater than the table size 31" x 19", the stencil will be cut in sections.
Available Online Quote Calculator
LaserCut on 1.5mm Rowmark ADA Substrate
LaserCut on 3mm Acrylic
LaserCut on 4.5mm Acrylic
LaserCut on 6mm Acrylic
Continue
  WJT Sign Supply is not responsible for typographical or photographical errors.
  Prices are listed in Canadian funds and specifications are subject to change without notice.
  WJT Sign Supply
  160 Bentley St. Markham, Ontario, Canada L3R-3L2
  Toll-free: 1-800-465-8650
  Tel: 905-475-2632
Copyright © 2005 WJT Sign Supply.
Powered by osCommerce